Allied Telesis AT-TQ5403 - Table 4. Monitoring > Status > Radio1, Radio2, or Radio3

Monitoring
26
Note
The DFS (Dynamic Frequency Selection) field is only shown for
Radio2 and Radio3. DFS is not available and is not shown for
Radio1.
The fields are defined in Table 4 for the Monitoring > Status > Radio1,
Radio2, and Radio3 windows.
Table 4. Monitoring > Status > Radio1, Radio2, or Radio3
Item Name Description
MAC Address Displays the MAC address of the wireless interface. "-"
is displayed when the wireless LAN status is set to
"Disabled".
Status Displays the status (up, down) of the wireless interface.
Mode The current mode (communication protocol) of the
wireless interface is displayed.
"-" is displayed when the wireless LAN status is set to
"Disabled".
Radio1 is IEEE 802.11b/g, IEEE 802.11b/g/n
Radio2 and Radio3 are IEEE 802.11a, IEEE 802.11a/n/
ac
Operational
Channel
The currently used channel is displayed.
"-" is displayed when the wireless LAN status is set to
"Disabled".
Bandwidth Displays the bandwidth currently used.
"- MHz" is displayed when the wireless LAN status is set
to "Disabled", .
Transmission
Power
The currently set transmission output is displayed.
"- dBm" is displayed when the wireless LAN status is set
to "Disabled".