AT-TQ5403 Access Point User’s Guide
41
If you update or change any of these parameters, click the SAVE &
APPLY button to save and update your configuration.
Enable Daylight
Saving
Check box - Daylight Savings is enabled.
No Check box - Daylight Savings is disabled.
Current System
Time (24 HR)
The time held by this product is displayed.
Interval to
Synchronize
Set the interval at which synchronization with
the NTP server is performed with a
numerical value (minutes) from 1 to 9999.
The factory default is "10".
NTP Server Enter the IP address or host name (FQDN)
of the NTP server to be referenced.
The factory default is blank.
(Example) ntp.your.domain.com,
12.34.56.78
NOTE: A FQDN (Fully qualified domain
name) is a concatenation of labels
(character strings) with periods.
Half-width alphanumeric characters and
hyphens can be used for each label. The first
digit is allowed. A hyphen can not be used at
the beginning or the end of each label. The
number of characters for each label is 63
characters or less.
The total number of characters of the FQDN,
including the period, is 253 characters or
less.
Table 14. Settings > System > Time - “NTP” Selection (Continued)
Item Name Description
To Next Page
Loading...
Need help?
General
