AT-TQ5403 Access Point User’s Guide
43
If you update or change any of these parameters, click the SAVE &
APPLY button to save and update your configuration.
"HTTP status" and "HTTPS status" can be set individually. Also,
please do not disable both "HTTP status" and "HTTPS status" at the
same time. If you do this, you will not be able to open a management
session.
Since the SSL certificate of this product is issued by Allied Telesis
Corporation, Web browsers can not confirm that this is the correct
certificate. When accessing this product from a Web browser, it will
be displayed as "There is a problem with the security certificate of
this Web site." When you click on the active link that says, "Continue
browsing of this site (not recommended)", your management
session will be displayed using encrypted communication.
HTTP Port The port number of the HTTP server. You
can set from 0 to 65535. The factory default
is "80".
HTTPS Status Select "Enabled" when using the HTTPS
protocol (management session
communication is encrypted). When
"Disabled" is selected, HTTPS protocol
communication is not active.
The factory default is "Disabled”.
Self Signed
Certificate
GENERATE Button: Generate the SSL
certificate of the HTTPS server and restart
the HTTPS server.
Table 15. Settings > System > Web Window (Continued)
Item Name Description
To Next Page
Loading...
Need help?
General
