VI-6
Cutting fluid pump suction filter
Remove the cutting fluid
pump, and clean the
suction filter.
LUBRICATION
Check the lubrication condition of the following parts. Remove the old
grease deposited on and around their nipples and apply fresh grease to
them with a grease gun if necessary.
Recommended greases:Esso Lithtan EP2
Shell Alvania EP Grease R2
Mobil Mobilux EP2
NOTICE
O Be sure to apply the grease to the grease nipples with a grease gun. Do not
apply an excessive amount of grease.
Driven wheel bearing Drive wheel bearing
Worm shaft bearing Saw blade tension controller slide
To Next Page
Loading...
