II-5
CLEANING
After the machine has been installed in place, wipe off unnecessary rust-
preventive grease with a cloth dampened with kerosene.
Apply machine oil to the machine surfaces that are susceptible to rusting.
NOTICE
O If the rust-preventive grease is washed with a cutting fluid, the cutting fluid pump
may be clogged, resulting in failure. Be sure to wipe off with kerosene.
O If the rust-preventive grease is removed with a scraper or the like, or the
painted surfaces are wiped with a thinner or other solvent, the machine may
be damaged or the paint may be removed.
To Next Page
Loading...
