Amada HFA-400 - Roller Table; Roller Stand; Head-End Positioning Function (Factory Option

A-3
ROLLER TABLE
Installed at the rear of the machine and used for cutting long workpieces.
The roller table is equipped with vertical rollers whose distance can be
adjusted.
Specifications of roller
table
Table length: 2 m {6.56 ft}
Allowable loading mass:
1000 kg/m {7230 lb/ft}
ROLLER STAND
Used as accessory to the machine or roller table when cutting long
workpieces. The height of the roller stand can be adjusted to suit the
pass line of the workpieces.
Specifications of roller
stand
Height adjusting range:
650 to 780 mm {25.6 to
30.7 in.} for HFA-250 and
HFA-250W,
780 to 820 mm {30.7 to
32.3 in.} for HFA-400 and
HFA-400W
Allowable loading mass:
600 kg {1320 lb} for HFA-
250 and HFA-250W,
1500 kg {3310 lb} for HFA-
400 and HFA-400W
HEAD-END POSITIONING FUNCTION
(FACTORY OPTION)
Once the work is set in the rear vise, the head-end positioning function
automatically feeds the work for the preset length and makes the
machine ready for automatic operation. (The machine can
continuously go to the automatic operation.)