Amada HFA-400 - Positioning Work

IV-15
Positioning work
Position the loaded work as described below.
1 Press and hold the
REAR VISE
FORWARD button to
move the rear vise to
the forward limit and
move the work
forward.
CUTTING
LINE
SAW BLADE
RUNNING LINE
FORWARD
LIMIT
2 Press and hold the
FRONT VISE CLOSE
button to clamp the
work with the front
vise.
3 Press and hold the
REAR VISE OPEN
button to open the
rear vise.
4 Press and hold the
REAR VISE
BACKWARD button
to move the rear vise
to the backward limit.
BACKWARD
LIMIT
5 Press and hold the
REAR VISE CLOSE
button to clamp the
work with the rear
vise.
6 Press and hold the
FRONT VISE OPEN
button to open the
front vise.