I-15
Automatic backgauge function
Number of input stations 99
Cutoff length
5.0 to 9999.9 mm in 0.1-mm increments,
0.197 to 99.999 inches in 0.001-inch increments
10.0 to 9999.9 mm {0.394 to 99.999 in.} when machine continues to
operate automatically according to preset cutting data
Number of cut pieces 1 to 9999 per station
Kerf compensation
Automatic kerf compensation
Also automatically calculated during feed of long work
Input method Numeric-key input
Cutting data display LCD screen
Memory backup Yes (dedicated battery built in)
To Next Page
Loading...
