Web RCS
1. Go to the Edit menu on the Web RCS interface.
2. Select the MON. STREAM tab to access the monitoring page.
3. Go to the Properties toolbar on right-hand side.
4. Under Setup > Source, select the input to monitor.
NOTE: You can also select the input from the Inputs tab on the left-hand toolbar.
5. If required, select the Quality of the monitoring stream.
Available monitoring qualities include:
TIP: Use the Play and Fullscreen buttons at the bottom of the monitoring screen to control the monitoring
stream playback and display size.
To enable/disable the live feedback:
Front Panel
NOTE: This function is not available via the front panel.
Web RCS
1. Go to the Setup menu on the Web RCS interface.
2. Click on the INPUTS tab to access the inputs setup page.
To Next Page
Loading...
Need help?
General
