A/V mapping:
Select an A/V mapping mode to map an audio stream to the output (embedded audio by A/V mapping):
• Follow mapping mode: use the audio of the input selected at runtime (A/V mapping by video source
selection);
• Direct routing mode: use a specifically set audio source (A/V mapping by audio embedded in video
source selection).
TIP: Use the Follow mapping mode to also map audio streams to input sources.
VIEW SETTINGS
Control how each input appears in the screen by setting up the input's "view":
• Use Pan and Zoom to size and position the input in the screen.
• Apply a color Effect or enable a Flip movement on the live input.
• Save the input view settings and recall them later on any input via the View Bank.
• Create Presets of your input and view settings and load them readily at runtime.
TIP: Double-click on an input selection button to access the input setup and view settings menu.
SOURCE CONTROL
• Freeze the output and Monitor inputs and outputs on the front panel LCD display.
• Customize the Transition Type and the Transition Duration to smoothly transition between sources.
• Use Frames to transition through frame or activate the Quick Frame function to quickly display a
foreground frame on the output.
• Select the input to display on the output by choosing the corresponding INPUT SELECTION button.
TIP: Enable the Safe Input Select control function (CONTROL > Front Panel) to disable the selection of inputs
without signal.
BUTTON COLOR USAGE
• RED: Active input, function or shortcut.
• GREEN: Available input, function or shortcut.
• BLINKING: Device initializing.
• OFF: Not available input, function or shortcut.
TIP: Check out the front panel physical description and visit the VIO 4K - Menu Tree for a complete description of all
available buttons and menus.
The following graph also provides a quick overview of the VIO 4K operational environment:
To Next Page
Loading...
Need help?
General
