Anritsu LMR Master S412E

To Next Page

To Previous Page

Commands by Mode

B-2 PN: 10580-00319 Rev. N S412E PM

:CALCulate:LIMit:CENTer ..........................................................................................................4-2

:CALCulate:LIMit:ENVelope:CREate .........................................................................................4-2

:CALCulate:LIMit:ENVelope:OFFSet <amplitude>

:CALCulate:LIMit:ENVelope:OFFSet? .......................................................................................4-3

:CALCulate:LIMit:ENVelope:POINt <number>

:CALCulate:LIMit:ENVelope:POINt? ..........................................................................................4-3

:CALCulate:LIMit:ENVelope:SHAPe SQUare|SLOPe

:CALCulate:LIMit:ENVelope:SHAPe? ........................................................................................4-4

:CALCulate:LIMit:ENVelope:UPDate:Y ......................................................................................4-4

:CALCulate:LIMit:FAIL?..............................................................................................................4-4

:CALCulate:LIMit:LOWer:ALARm OFF|ON|0|1

:CALCulate:LIMit:LOWer:ALARm? ............................................................................................4-5

:CALCulate:LIMit:LOWer:FAIL? .................................................................................................4-5

:CALCulate:LIMit:LOWer:POINt?...............................................................................................4-5

:CALCulate:LIMit:LOWer[:STATe] OFF|ON|0|1

:CALCulate:LIMit:LOWer[:STATe]?............................................................................................4-6

:CALCulate:LIMit:LTYPe ABSolute|RELative

:CALCulate:LIMit:LTYPe? ..........................................................................................................4-6

:CALCulate:LIMit:MIRRor...........................................................................................................4-7

:CALCulate:LIMit:POINt:ADD.....................................................................................................4-7

:CALCulate:LIMit:POINt:DELete ................................................................................................4-7

:CALCulate:LIMit:POINt:LEFT....................................................................................................4-7

:CALCulate:LIMit:POINt:RIGHt ..................................................................................................4-7

:CALCulate:LIMit:POINt:X <x-parameter>

:CALCulate:LIMit:POINt:X? ........................................................................................................4-8

:CALCulate:LIMit:POINt:Y <y-parameter>

:CALCulate:LIMit:POINt:Y? ........................................................................................................4-8

:CALCulate:LIMit:POINt? ...........................................................................................................4-8

:CALCulate:LIMit:TYPe 0|1

:CALCulate:LIMit:TYPe? ............................................................................................................4-9

:CALCulate:LIMit:UPPer:ALARm OFF|ON|0|1

:CALCulate:LIMit:UPPer:ALARm? .............................................................................................4-9

:CALCulate:LIMit:UPPer:FAIL? ..................................................................................................4-9

:CALCulate:LIMit:UPPer:POINt?..............................................................................................4-10

:CALCulate:LIMit:UPPer[:STATe] OFF|ON|0|1

:CALCulate:LIMit:UPPer[:STATe]? ..........................................................................................4-10

:CALCulate:LIMit:VALue <value>.............................................................................................4-11

:CALCulate:LIMit:VERTical:ADD..............................................................................................4-11

:CALCulate:LIMit:X <x-parameter> ..........................................................................................4-11

Anritsu LMR Master S412E - Page 668