Network
Select WLANWLAN or EthernetEthernet and touch SetupSetup. The WLANWLAN or EthernetEthernet setting
screen appears.
Basic config
When the Network Master is connected to the server, set the Network Master
name displayed on the MX109020A Site Over Remote Access Basic License
screen.
Application config
Set VNCVNC and File SharingFile Sharing. To connect to the server, select the Enable VNCEnable VNC
ServerServer check box and Share File SystemShare File System check box.
Cloud
Select the ConnectConnect check box to have the Network Master connected to the
server.
Also, the following Network settings can be forcibly changed.
VNC:
Enable VNC Server ON
Enable VNC Password OFF
File Sharing
Share File System ON
Even if the Network Master cannot connect to the server due to network
environment, settings, and other factors when the ConnectConnect check box is
selected, it tries to connect to the server a certain number of times.
If it cannot connect to the server within the specified number of retries, it ends
retrying connection.
When the Network Master is ready to connect to the server due to changes to
network environment and settings, clear the ConnectConnect check box, and then
select it again.
Message Area
A message appears when the status is not normal.
The following information is displayed when the Network Master is controlled
from MX109020A Site Over Remote Access Basic License.
User
Displays the user name currently logged in to MX109020A Site Over Remote
Access Basic License.
Password
Displays the password given on the license purchase certificate of the option
MT1040A-011.
To Next Page
Loading...
