I2C analysisI2C analysis
Specifying the address and the page allows users to read or write the data.
Burst ReadBurst Read
Specifying the top address, page, and length allows users to read the data.
Touching the ExportExport opens the dialog box to save the read data.
When the transceiver is QSFP+ or QSFP28, touching the I2C analysisI2C analysis button at
the bottom corner displays the dialog box below.
This dialog box allows reading/writing information into the registers of the
optical transceiver via I
2
C (Inter-Integrated Circuit) interface.
Registers in the transceiver are defined in
INF-8438i Specification for QSFP
(Quad Small Form factor Pluggable) Transceiver
.
To Next Page
Loading...
