Latency TimestampLatency Timestamp
Throughput TypeThroughput Type
GraphicalGraphical
presentationpresentation
Full columnFull column
Select whether to register Average throughputAverage throughput or Maximum throughputMaximum throughput.
ResolutionResolution
Displays the resolution of the latency/jitter measurement. This resolution is 5
ns.
If the software version of the Network Master is 10.02 or earlier, the resolution
is 100 ns.
66..99..33 Test ResultsTest Results
The results of the performed RFC 2544 tests can be presented in either tabular
form or as graphical representations. The graphical presentation mode provides
an overview of the results and the progress of the test.
On the test-specific result screen, you switch between the two modes by using
the GraphGraph and TableTable buttons.
Switches the items to display in the table. When the Full columnFull column button is
green, all measurement results are displayed.
To Next Page
Loading...
