1313..33 Formatting the data area in the Network MasterFormatting the data area in the Network Master
Occasionally it is required to remove customer data from Network Master such
as after instrument rental. With Software tools you can format Network Master
internal data area.
Two data areas are available: Data area and Property area.
Data area contains user rewritable data. Property area contains system data.
Each area can be formatted with tools stored on a USB flash drive. The tools
are stored on the Utilities ROM. Please refer to the following description to
format.
To perform Data area formatting, copy
"REFORMAT_DATA_AREA.MT1000_SW" to root of USB flash drive.
To perform Property area formatting, copy
"REFORMAT_PROPERTY_AREA.MT1000_SW" to root of USB flash drive.
Place the format tools in the root of an empty of USB flash drive. To perform
both kinds of formattings simultaneously, place both tools in the root together.
ProcedureProcedure
1. Remove power cord and turn instrument off. Power button turns off.
2. Insert the USB flash drive with the tools in one of the USB Type-A ports.
3. Connect power cord or push power button to turn power on. Then formatting is
executed and Network Master will reboot automatically.
4. Remove USB flash drive. The formatting is completed.
To Next Page
Loading...
