12. Assign an IP address to the Network Master. This is done in the EthernetEthernet
available in the Network screen as described in the
Graphical User Interface
chapter.
13. Select Mount Remote FolderMount Remote Folder in the File Sharing settings.
14. Enter the IP address (step 10), domain (step 5), user name, folder name and
other information.
Note that enter User name of User Account of the PC.
15. Touch ApplyApply. If the remote folder has mounted successfully, you will see
"CONNECTED" is shown at Mount Status. Touch OKOK to close dialog box.
16. On Instruments Toolbar, touch File Manager ( ) icon. Now, you can see the
shared folder is mounted to Internal\remote.
To Next Page
Loading...
