EasyManua.ls Logo

Anyview A6 - Page 266

Anyview A6
305 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Patient monitor User’s manual
27
HAL
4%
ENF, ISO, SEV
5%
DES
15%
Xe (Xenon)
80%
-10% of reading
1)
He (Helium)
50%
-6% of reading
1)
Metered dose inhaler
Propellants
Not for use with metered dose inhaler propellants
C
2
H
5
OH (Ethanol)
0.3%
C
3
H
7
OH
(Isopropanol)
0.5%
CH
3
COCH
3
(Acetone)
1%
CH
4
(Methane)
3%
CO (Carbon
monoxide)
1%
NO (Nitrogen
monoxide)
0.02%
O
2
100%
Note 1: Interference at indicated gas level. For example, 50 % Helium typically decreases
the CO2 readings by 6%. This means that if measuring on a mixture containing 5.0 % CO2
and 50 % Helium, the actual measured CO2 concentration will typically be (1-0.06) * 5.0
% = 4.7 % CO2.
A.6.9 ICG
Measurement way
Measurement of thoracic electrical bioimpedance
Measurement range
HR: 40 bpm to 250 bpm
SV: 5 mL to 250 mL
SI: 5 mL/m
2
to 125 mL/m
2
C.O. : 1.4 L/min to 15 L/min
TFC: 15 /kΩ to 143 /kΩ
Accuracy
HR: ±2 bpm
SV: unspecified
C.O. : unspecified
Alarm range
C.I.: 0.0 L/min/m
2
to 15.0 L/min/m
2
, high/low limit can
be adjusted continuously.
TFC: 10 /kΩ to 150 /kΩ, high/low limit can be adjusted
continuously.

Table of Contents

Related product manuals