Patient monitor User’s manual
Chapter 4-11
1) Select the Other-Bed-Monitoring window, and then choose the device number
you need in the ejected list;
2) Select【Select Wave】to display a certain physiological parameter waveform of
the selected other-bed monitor in the other-bed-monitoring window;
3) Lastly, select 【 Start/Stop】 to receive data and start other-bed monitoring. If
need to stop other-bed monitoring, select【 Start/Stop】 again. After that, data
receiving will be stopped, and so will the current other-bed monitoring.
To Next Page
Loading...
