APRILIA RSV4 Factory a-PRC 2009 User Manual

WATER PUMP
pos.
Description Type Quantity Torque Notes
1 Screws fastening the pump to the
crankcase
M6x25 2 10 Nm (7.37 lbf ft) -
Electric fan
•
Remove the front underfairings and the
hand grip position sensor
•
Disconnect the cooling fan connector
to be replaced.
•
Internally blocking the nuts, unscrew
the fixing screw from the internal part.
•
Make sure that the nuts and washers
are retrieved.
See also
RSV4 Factory a-PRC Cooling system
COOL SYS - 475

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English