APRILIA RSV4 Factory a-PRC 2009 User Manual

•
Insert the key in the lock and turn it
clockwise.
•
Remove the tail fairing.
•
Fit the two-seater saddle.
Adjusting the rear-view window joint.
•
With the mirror closed (base turned 90°
in relation to the mirror) check that the
nut is closed properly, as indicated by
the arrow, (you should be able to see
about 0.5 mm - 1mm (0.02 in - 0.04 in)
of the threaded pin projecting from the
nut and the Loctite 270).
If the nut is not closed correctly, proceed as fol-
lows:
•
Close the mirror (base turned 90° in re-
lation to the mirror).
•
Remove the glass from the indicator
light.
Pre-delivery RSV4 Factory a-PRC
PRE DE - 516

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English