Arjo Tornado - Machine Programs Overview

16
2.7 The programs
WARNING!
The goods may be hot at the end of the program.
If the temperature of the goods is above 60°C, the
display shows U7.
Programs, standard set:
P1 Economy program for lightly soiled goods.
P2 Normal program for normally soiled goods.
P3 Intensive program for heavily soiled goods.
The following programs can also be selected:
P4 Normal program with detergent dosing (option).
P5 Intensive program with detergent dosing (option).
P6 Normal program with detergent dosing in tank and/or spray
dosing in the chamber (option).
P7 Intensive program with detergent dosing and/or spray
dosing in the chamber (option).
P8 5LPÀXVKLQJSURJUDP
P10 Extra intensive program to meet the requirements of HTM
2030 (option).
P11 Extra intensive program with detergent dosing in tank, to
meet the requirements of HTM 2030 (option).
P12 Extra intensive program with detergent dosing in tank and/
or spray dosing in the chamber, to meet the requirements
of HTM 2030 (option).
P14 Extra intensive program to meet the requirements of Koller
W and HTM 2030.
P15 Extra intensive program with detergent dosing in tank or
pump, to meet the requirements of Koller W and HTM
2030 (option).
P16 Extra intensive program with detergent dosing in tank and/
or spray dosing in the chamber, to meet the requirements
of Koller W and HTM 2030 (option).
P18 Cooling phase with combined rinse-aid and descaler
dosing in tank (option).
P19 Cooling phase with rinse-aid dosing in pump (option).
P20 Cooling phase with rinse-aid dosing in tank.
The process starts when the desired program is chosen and the
yellow button by
lights up (The normal program takes about
¿YHPLQXWHV:KHQWKHSURFHVVLVFRPSOHWHWKHJUHHQODPSDW
lights up and the door can be opened (manual door). Machine with
automatic door opens when the IR diode, , is activated for at
least 1 second.