71
6.3.9 Internal cleaning of the chamber (2.8)
WARNING!
Concentrated descalers in the steam generator or
steam boiler can be damaging for the machine.
This removes the coating that has formed in the chamber. If it is
not removed, additional dirt and debris can quickly build up in the
chamber. Cleaning is ideally carried out when testing by using a
descaler designed for washing machines.
6.3.10 Checking door and door springs (2.9)
Check that the spring brakes the door so that is closes gently.
Make sure that the door closes properly.
&KHFNWKDWWKHGRRUGRHVQRW¿WWRRFORVHWRWKHVHDOLQJIRUWKH
chamber at the upper edge when closing the door. This can result
in unnecessary wear and tear on the chamber seal. Adjust if
necessary.
6.4 Process tank (Item 3)
6.4.1 Cleaning the process tank (3.1)
In order to maintain good hygiene and proper functioning, the
process tank should be cleaned regularly. If this is not done,
there is an increased risk of bacterial growth in the tank, which
can cause hygiene problems. Clean the tank using a descaler for
dishwashers according to the agent’s instructions.
6.4.2 Checking level sensors (3.2)
In order to maintain good hygiene and proper functioning, the level
sensor should be checked and cleaned every year. If this is not
done, there is an increased risk of a breakdown or false alarm.
&KHFNWKHOHYHOVHQVRUIXQFWLRQE\HQVXULQJWKDWWKHÀRDWVDUHQRW
stuck but move freely in the level sensor.
To Next Page
Loading...
Need help?
General
