Arjo Tornado - Error and Program Statistics; Error Statistics

47
4.10.5 Addition of softened water
Line 54, Authorization level: C
Specify whether soft water is to be added and if so where.
7KHWLPHIRUZKLFKWKHZDWHUZLOOEHDGGHGLVVSHFL¿HGDWOLQH
00 = No soft water is to be added.
01 = Soft water is to be added in the tank.
02 = Soft water is to be added in the steam generator.
Default value is 00.
4.10.6 Time for soft water
Line 55, Authorization level: C
Length of time for which soft water is to be added if the answer to
line 54 was 01 or 02.
00 - 99 seconds in one-second steps.
4.10.7 Flushing time, cooling (internal)
Line 56, Authorization level: C
7KHFRROLQJSKDVHÀXVKHVIRUVHFRQGV,IPRUHFRROLQJLV
required, the time can be extended
E\±VHFRQGV
Default value is 0.0.
 3XPSWLPHÀXVKLQJWLPHLQWKHLQVWUXFWLRQ³3XOVHÀXVKLQJWROHYHO´
Line 57, Sub-line 1, For future use
 3DXVHWLPHLQWKHLQVWUXFWLRQ³3XOVHÀXVKLQJWROHYHO´
Line 57, Sub-line 2, For future use
 3XOVHVLQWKHLQVWUXFWLRQ³3XOVHÀXVKLQJWROHYHO´
Line 57, Sub-line 3, For future use
4.11 Error statistics, lines 60 - 63
4.11.1 Time of error
Line 60
Shows the number of seconds for which the program had been
running when the error occurred.
00 - 9999 seconds
This value cannot be changed.