Arjo Tornado - Check or Change a Numerical Value on a Line with a Sub-Line Number

20
3.5 Check or change a numerical value on a line with a sub-line
number
• Press (increase line number) or (reduce line number)
so the display shows the right line number. Holding down the
button scrolls the value up or down for as long as the button
is pressed.
Line numbers always appear
to the left on the display.
• Press
1RZWKH¿UVWVXEOLQHQXPEHULVVKRZQ7KHFRORQ
to the left of the number shows that it is a sub-line number.
:
Indicates that a sub-line
number is being displayed
• If necessary, press
(increase line number) to reach the
correct sub-line number.
• Press . Now the numerical value of the sub-line number is
VKRZQ7KHQXPHULFDOYDOXHÀDVKHVLI\RXDUHDXWKRUL]HGWR
change it.
The numerical value is
shown to the left on the
bottom line of the display.
• Now you can change the numerical value:
࢓ If you want to change the numerical value, press
(increase) or (reduce) until the correct value is
shown. Press to store the new numerical value
in the memory of the computer.
࢓ When you have finished, press once more to show
the sub-line number again.
• When you want to quit the sub-line numbers:
࢓ Press
. This returns you to the line number.
࢓ Now you can continue to check or change further
numerical values.