72
6.4.3 Checking inlet valves (3.3)
WARNING!
All supply lines must be closed when working on
the pipe system.
In order to ensure a proper supply of water, the valves at the water
connection points must be inspected every year. If this is not done,
WKHULVNRIOHDNDJHRUWKHWDQN¿OOLQJVORZO\LQFUHDVHVZKLFKFDQ
cause operational disturbances.
Check the valves on the water connector by removing and
FOHDQLQJWKHÀRZOLPLWHUDQG¿OWHU7KHRXWÀRZRIWKHYDOYHVKRXOG
be cleaned in order to prevent the stream from breaking and
causing water leakage.
000218
Figure 7. Inlet valve
6.5 Steam generator (Item 4)
6.5.1 Checking the steam generator (4.1)
Check the connections to the steam generator for leakage and
make sure the covering insulation is intact and no hot surfaces are
exposed.