Arjo Tornado - Instruction for Last Error; Counter, Total Number of Errors; Counter for Error Codes F1 - F18

48
4.11.2 Instruction for last error
Line 61
Show the program line in the relevant program where the error
occurred.
00 = Error not in the program
01 - 9999 = Program line
This value cannot be changed.
4.11.3 Counter, total number of errors
Line 62
Counter for the total number of errors since the machine was
installed.
00 - 9999
This value cannot be changed or zeroed.
4.11.4 Counter for error codes F1 - F18
/LQH6XEOLQHV±$XWKRUL]DWLRQFRGH&
Each error code has its own counter with the same sub-line
number as the error code.
Error code Meaning
F1 Temperature sensor error
F2 Level sensor error, tank
F3 Level sensor error, detergent
F4 Door logic error
F5 /RJLFHUURUPDFKLQHFRQ¿JXUDWLRQ
F6 Inspection request
F7 Disinfection temperature not reached
F8 Door open/unlocked during process
F9 Setting incorrect
F10 Could not reach/maintain requested tank level
F11 Leakage/drain blocked
F12 Door cannot be locked
F14 Operating time, door (takes longer than
20 seconds)
F18 Wrong machine type
The counters can be zeroed by pressing
.