Arjo Tornado - Disinfection and Cooling Control

43
4.8 Empty container alarm, line 34
/LQH6XEOLQHV±$XWKRUL]DWLRQOHYHO&
Here you can specify how the empty container alarms from the
various containers are managed.
The value consists of two or four digits:
00 = No alarm
01XX = 01 means that a warning will be given. The last two digits,
±VSHFLI\WKHQXPEHURISURFHVVHVWKDQFDQVWLOOEHUXQDIWHU
the warning.
02 = An error alarm will be given. The machine cannot run until the
alarm has been acted on.
The various sub-lines correspond to the following agents:
01 = Alarm for descaler.
01XX = Alarm for descaler, XX processes remaining. Default value
is 25.
02 = Alarm for chemical agent.
02XX = Alarm for chemical agent, XX processes remaining. Default
value is 0.
03 = Alarm for rinse-aid.
03XX = Alarm for rinse-aid, XX processes remaining. Default value
is 25.
04 = Alarm for process agent.
04XX = Alarm for process agent, XX process agent remaining.
Default value is 10.
05 = Alarm for spray agent.
05XX = Alarm for spray agent, XX processes remaining. Default
value is 10.
4.9 Disinfection, lines 35 - 49
4.9.1 Normal disinfection method
Line 35, For future use
4.9.2 Standby disinfection method
Line 36, For future use
4.9.3 Viewing mode
Line 37, Authorization level: C
Indicates what is shown in the display.
1 = Temperature
2 = A
0
value
3 = A
0
value / Temperature
4 = Remaining time
5 = Remaining time/Temperature
6 = Remaining time / A
0
value
7 = Remaining time / A
0
value / Temperature
Default value is 7.