Arjo Tornado - Mains Frequency; Pump Starting Time; Temperature Indication (Red LED); Temperature, Condensate Cooling

36
4.3.11 Mains frequency
Line 19, Authorization level: C
Adaptation to the frequency of the electricity supply network. Used
to control the dosing pump so that dosing times are correct.
1 = 50 Hz
2 = 60 Hz
Default value is 1.
4.3.12 Pump starting time
Line 20, For future use
4.3.13 Temperature indication (red LED)
Line 21, Authorization level: C
Choose between two functions for the red LED on the panel:
01 = The LED is lit if the disinfection temperature has not been
reached during the program.
02 = The LED is lit during heating and the disinfection temperature
has not been reached.
Default value is 01.
4.3.14 Temperature, condensate cooling
Line 22, For future use
4.3.15 Time to open slightly
Line 23, Authorization level: C
7LPHIRUDFWLYDWLRQRI³GRRURSHQLQJ´VRWKDWWKHGRRURSHQVVOLJKWO\
±VHFRQGV
Default value is 2.0.
4.3.16 Waiting time when slightly open
Line 24, Authorization level: C
7LPHIRUZKLFKWKHGRRUPXVWVWD\RSHQVOLJKWO\±VHFRQGV
Default value is 0.
 5XQÀXVKLQJSURJUDP
Line 28, Authorization level: C
6SHFL¿HVZKLFKÀXVKLQJSURJUDPLVWREHFDOOHGLIWKHSDUDPHWHU
³ÀXVKLQJSURJUDP´LQWKHÀXVKLQJSURJUDPLQVWUXFWLRQ³5XQÀXVKLQJ
program.” (Function is only used for internal cooling.)
0-25
Default value is 20.
 6HWÀXVKLQJSURJUDP
Line 29, For future use