Arjo Tornado - Program Selection, Line 30; Program Selection

37
4.4 Program selection, line 30
4.4.1 Program selection
/LQH6XEOLQHV±$XWKRUL]DWLRQOHYHO&
Function for determining which program is to be linked to the
program selection buttons.
The numbers of the programs are as follows. They can be linked
to the various buttons:
Default:
P1 Economy program for lightly soiled goods.
P2 Normal program for normally soiled goods.
P3 Intensive program for heavily soiled goods.
Standard plus dosing:
P4 Normal program with detergent dosing (option).
P5 Intensive program with detergent dosing (option).
P6 Normal program with detergent dosing in tank and/or
spray dosing in the chamber (option).
P7 Intensive program with detergent dosing and/or spray
dosing in the chamber (option).
5LPÀXVKLQJ
P8 5LPÀXVKLQJSURJUDP
HTM2030 and Koller:
P10 Extra intensive program to meet the requirements of
HTM 2030 (option).
P11 Extra intensive program with detergent dosing in tank,
to meet the requirements of HTM 2030 (option).
P12 Extra intensive program with detergent dosing in
tank and/or spray dosing in the chamber, to meet the
requirements of HTM 2030 (option).
P14 Extra intensive program to meet the requirements
of Koller W and HTM 2030.
P15 Extra intensive program with detergent dosing in tank
or pump, to meet the requirements of Koller W and HTM
2030 (option).
P16 Extra intensive program with detergent dosing in tank or
spray dosing in the chamber, to meet the requirements
of Koller W and HTM 2030 (option).
Programs used for internal cooling. (Called by the Flushing
program parameter):