Arjo Tornado - Configuration and Control Parameters; Basic Configuration Settings

34
 &RQ¿JXUDWLRQOLQHV±
4.3.1 Start-up code
Line 10, Authorization level C
Used to choose whether a startup code is needed.
0 = Not active (no startup code needed)
1 = Active (startup code needed)
Default value is 0.
4.3.2 Child safety
Line 11, Authorization level BC
Used to choose whether the child safety function is used.
0 = Not active
1 = Active
Default value is 0.
 'LVLQIHFWLRQFRQ¿JXUDWLRQ
Line 12, Authorization level BC
8VHGWRVHOHFWWKHGLVLQIHFWLRQFRQ¿JXUDWLRQ
 1RUPDOFRQ¿JXUDWLRQ
 5HVHUYHFRQ¿JXUDWLRQ
Default value is 1.
4.3.4 Dosing method
Line 13:1, Authorization level: BC
With the function in Manual mode: You must press
before
starting the program to ensure that cleaning agent is added during
the program.
With the function in Automatic mode: Detergent is added
automatically during each program. Press
if you do not want to
add detergent during the program.
1 = Manual
2 = Automatic
Default value is 1.