ASL INTERCOM VAR8 User Manual

VAR8 and Variants Operation, Commissioning, Fault Finding, and Maintenance Guide
sue: 02 complete, approved
-
Is
Page 115 of 166 Page 115 of 166
24.7 Clearing the Configuration Data and Restoring the Default
Settings
24.7 Clearing the Configuration Data and Restoring the Default
Settings
7. The user can clear all configuration data stored in the Router through the following menu. 7. The user can clear all configuration data stored in the Router through the following menu.
All default settings are restored, see Table 9. All default settings are restored, see Table 9.
Menu: ConfigurationÆSystemÆAccessÆConfig LogÆClear config. Menu: ConfigurationÆSystemÆAccessÆConfig LogÆClear config.
• The system will become inoperable after clearing the configuration data.
• It is recommend that the current configuration be loaded and saved to a file using the
Configuration Tool before clearing the configuration data, see Section “26 PC Configuration
Tool”.
!
!
24.8 System Software Versions
8. The Router software suite is composed by separated codes. The version of the currently installed codes
may be consulted through the following menu.
Menu: ConfigurationÆSystemÆMiscÆSoftware

ASL INTERCOM VAR8 Specifications

General

Brand	ASL INTERCOM
Model	VAR8
Category	Controller
Language	English