ASL INTERCOM VAR8 - Default Settings Overview

VAR8 and Variants Operation, Commissioning, Fault Finding, and Maintenance Guide -
Is
Page 159 of 166
sue: 02 complete, approved
30.1.3 Default Settings
Table 9 VAR8 Default Settings
Setting Default Value
Access code 0999
Id 01
Report over-temperature No
Maximum temperature 70 °C
Input Type Unused
Inputs 1, 3, and 4 = Network Channel
Input Gain
−20 dB (−25 dB Music)
Input Surv Off (‘On’ on Network Channels)
Input Surv Sensitivity
−40
EQ 0 dB All bands, HPF=Off
Fades 00
Chime Type Off
Chime Level
−12 dB
Output Gains 0 dB
ANS Enabled / Not Tolerant
Name As input number
Output Level
−10 dB
EQ 0 dB All bands
Surveillance Mode Pulsed
Level
−18 dB
Override Gain
−30 dB
ANS Off
Name As output number
Number of Network Channels 3
DVA Modes DVA Full
Busy Indication On
Fault Contacts Not-config