VAR8 and Variants Operation, Commissioning, Fault Finding, and Maintenance Guide
sue: 02 complete, approved
-
Is
Page 43 of 166 Page 43 of 166
9.5 Local Fallback Configuration 9.5 Local Fallback Configuration
To Configure a Local Fallback: To Configure a Local Fallback:
13. Select the input, and then define which input acts as a fallback in the event of failure, if any. 13. Select the input, and then define which input acts as a fallback in the event of failure, if any.
Local inputs, typically DVAs, can be configured as fallbacks to microphone inputs. The fallback audio
source is used if the original audio source is unavailable for any reason.
Local inputs, typically DVAs, can be configured as fallbacks to microphone inputs. The fallback audio
source is used if the original audio source is unavailable for any reason.
Menu: ConfigurationÆSystemÆRouterÆInputsÆFallbackÆLocal Menu: ConfigurationÆSystemÆRouterÆInputsÆFallbackÆLocal
Reference to Configuration Tool
4
6
8
13
3
11
10
7
9
12
1
2