Media and Ink Cartridges
QL-E100 User Guide 28
Media Rolls
Supported Media Types and Sensing
This section describes the types of label media you can use with the printer.
Reflective Mark Media
Reflective mark media has black cue marks printed on the back of the label liner. These marks are
read by a sensor on the printer to determine the starting point of new labels.
Gap Media
Gap media has spaces between each label resulting from the removal of the matrix during the die
cutting process. When the matrix material is removed and the liner exposed, the die cut labels are
separated by gaps. These gaps are read by a sensor on the printer to determine the starting point
of new labels.
To Next Page
Loading...
