Safety
QL-E100 User Guide 83
Chapter 9: Safety
Before using this printer, please read this section thoroughly. Warnings to heed and important
matters are described here to prevent damage to the user and other persons.
Do not attempt to operate this printer in any way other than those mentioned in the User Guide.
General
Warnings
• If you find a large ink leak, switch the printer off immediately, disconnect the power plug from
the power source, and call for service. If you continue to use the printer, this could cause a fire
or serious electrical shock.
• Never clean the printer with water or any flammable liquid (alcohol, benzene, thinner, etc.)
either applied directly or with a cloth. If you accidentally spill liquid on the printer, switch the
printer off immediately, disconnect the power plug from the power source, and call for service.
If you continue to use the printer, this could cause a fire or serious electrical shock.
• If the printer emits smoke, unusual odors, or makes noises, leaving it could cause a fire or
serious electrical shock or damage to the printer. Switch the printer off immediately, disconnect
the power plug from the power source, make sure that the printer has stopped smoking, and
call for service. Do not attempt to repair the printer by yourself. This could cause a fire or
serious electrical shock.
• Use only a slightly damp cloth, thoroughly wrung out, to clean the printer surfaces. Never use
alcohol, thinner or any other flammable liquids. If such materials come into contact with
electrical components inside the printer, this could cause a fire or serious electrical shock.
Cautions
• There are high voltage points inside the printer. To avoid a fire or electrical shock, never
attempt to disassemble or repair the printer.
• Never insert or drop any metal objects into the printer when it is open. This could cause a fire
or serious electrical shock, or damage the printer. If something falls into the printer
accidentally, switch the printer off immediately, disconnect the power plug from the power
source, and call for service. If you continue to use the printer, this could cause a fire or serious
electrical shock.
• If the printer is dropped and damaged, switch the printer off immediately, disconnect the power
plug from the power source, and call for service. If you continue to use the printer, this could
cause a fire or serious electrical shock.
• To avoid a fire or electrical shock, never use flammable sprays around the printer.
• Never remove the cover from the printer. This could cause a serious electrical shock.
• Keep children from touching the power cord, internal parts of the printer when it is open, and
moving parts inside the printer (gears, belts, rollers, and electrical components). This could
cause personal injury or damage the printer.
To Next Page
Loading...
