359
7647H–AVR–03/12
Atmel ATmega16/32/64/M1/C1
33.7 7647B
1. Give the good signature for the CAN only product See “Signature Bytes” on page 300.
2. Provide the PCICR address in the “Register Summary” on page 347
3. Locate the SIGRD bit in SPMCSR in the “Register Summary” on page 347
4. Give the maximum clock of amplifiers See “Amplifier” on page 250.
5. Add ADHSM description. See “ADC Control and Status Register B– ADCSRB” on page
247.
6. Give the frequency value selected with the ACCKSEL bit. See “Analog Comparator 0
Control Register – AC0CON” on page 264.
7. Add some analog feature consideration See “Analog Feature Considerations” on page
275.
8. Add errata 2, 3 and 4. See “Errata Description” on page 352.
9. Update the Current Source resistor table See “LIN Current Source” on page 259.
33.8 7647A
First document revision
To Next Page
Loading...
