Autronica AutroGuard Multicriteria Protector V-430 Series - Page 85

Configuration Recommendations
AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339-4, 2022-12-09,
Autronica Fire and Security AS
Page 79
Typical
Application
Typical Challenges
Description
Operation
Class
Sensi-
tivity
Class
Heat Resp.
Category
environmental
challenges. If possible,
reduced sensitivity in
combination with flame
detection is
recommended.
Shopping Center
General installation,
roof, hallways etc. For
special applications like
kitchens etc. see
separate application
info.
Multi
Medium
A2S
Museum
Fast detection
Usually clean
environment. In some
cases, it will be
necessary to reduce the
sensitivity.
Multi
High
A1S
Laboratory
In general, we want
AutroGuard to be set to
the highest possible
sensitivity. In some
cases, it will be
necessary to reduce the
sensitivity.
Multi
High
A1S
Factory/Industrial
Dust, steam,
pollution,
temperature
Bursts of pollution like
dust etc.
Multi/
Smoke
Low
A2S
Factory/Industrial
Dust, steam,
pollution,
temperature
Longer periods of
pollution.
Smoke
Low
Disabled
Theater/Stage
Artificial smoke,
Pyro, heat
The standard
multicriteria protector
will handle some theater
smoke in operation class
SMOKE with LOW
sensitivity. If there is a
risk of significant
amount of theater
smoke reaching the
protector, a variant with
integrated CO sensor
should be used.
Smoke
Low
Disabled