After initial setup, you can modify these settings by selecting Configure > General from the1
endpoint's menus, or from the web interface select Basic Settings > Preferences > General.2
Before you begin3
Access the quick setup wizard from the endpoint or web interface, as described in
Configuring4
Basic Settings with the Quick Setup Wizard on page 35.5
Procedure6
1. Define the name and language as described in Table 4: Defining name and language of7
the XT Series on page 37.8
9
Figure 21: Setting Country and Language10
Table 4: Defining name and language of the XT Series
Field Description
System Name Enter the name of the XT Series in the System Name field. This
name is also used by default for the SIP username and the H.323
name, which can be manually changed.
System Name Unicode (Editing in the Web interface only) Enter the name here if it
includes non-ANSII characters such as Chinese or Japanese.
Country Enter the country location of the unit. The system menu and the
Language field automatically changes to the language used in the
selected country.
Language Choose the language of the graphical menu. The web menu
language can be changed in each web client without impacting the
system GUI.
Protocol Type Select the protocol the endpoint should use for calls, depending on
the organization’s existing infrastructure (SIP or H.323–based).
Contact your administrator for more information.
• H.323: Select if you are registering the endpoint to a gatekeeper
only. The wizard displays the gatekeeper configuration page. For
more information, see Configuring Basic Gatekeeper Settings on
page 41 or contact your administrator.
• SIP: Select if you are registering the endpoint to a SIP server
only. The wizard displays the SIP server configuration page. For
Table continues…
Applying basic settings
December 2017 Avaya Scopia
®
XT Series User Guide 37
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
Need help?
General
