Some settings may already be customized for your organization. If required, ask the system1
administrator for the device's password.2
The quick setup wizard automatically appears the first time you access the XT Series, either by3
turning it on or logging in to the web interface. Alternatively select Configure > Quick Setup from4
the Main Menu.5
6
Figure 20: Accessing the Quick Setup7
The quick setup wizard guides you through many of the following basic configuration tasks:8
Related links9
Applying basic settings on page 3310
Setting the System Name, Language, and Call Method on page 3611
Adjusting the Image Position on page 3812
Configuring Basic Network Settings on page 3913
Configuring Basic Gatekeeper Settings on page 4114
Configuring Basic SIP Settings on page 4215
Installing Avaya Scopia
®
XT Control to Use Keyboard and Mouse (XT Executive) on page 4316
Applying the Automatic Provisioning to Avaya Scopia
®
XT Series Endpoints on page 3417
Setting the System Name, Language, and Call Method18
About this task19
Note:
This step is for the manual configuration of your XT Series. If you have chosen the auto-20
provisioning (cloud) method of configuration, this step is not available.21
The first screen in the Quick Setup wizard enables you to define the name of your Avaya Scopia
®
22
XT Series, the country, the menu language, and the protocol the system uses for calls. The unit's23
name is displayed on the system's title bar and to other meeting participants. For example, Hong-24
Kong, 9th-Floor-Room, or NY-Office. There is also a unicode system name to enable non-25
English characters, available on the web interface only. For more advanced settings of the system26
name, see Deployment Guide for Avaya Scopia
®
XT Series.27
Getting Started
December 2017 Avaya Scopia
®
XT Series User Guide 36
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
Need help?
General
