Map Page
Envision EX5000 -10- 600-00151-001 Rev 01
u Cell - Displays storm cells using cell data obtained from a
WX-500 stormscope. Each lightning strike is displayed as
a yellow ‘+’ sign, and clumps of strikes indicate the cell
and cell intensity.
u Display Off - Turns display of lightning information off.
n Clear Strikes—Removes current lightning symbols to allow
for the refresh of lightning data when using a onboard
lightning sensor. Does not remove Datalink lightning.
n WX Rpts—Controls the type of Datalink weather information
displayed on the map, as follows:
u All—Displays graphical METARs, AIRMETs, and
SIGMETs.
u METARS—Displays graphical METARs only.
u AIRMET—Displays graphical AIRMETs only.
u SIGMET—Displays graphical SIGMETs only.
u DSPLY OFF—Turns off display of all weather
information.
For more information about Datalink functions, see Section
8, "Datalink (Optional)" on page 79.
2) Map Functions—Controls basic look of the map in terms of
orientation, number of elements, and base map.
n View—Orients the map for either Track/Heading Up or North
Up. FORWARD and CENTER views are oriented with Track/
Heading Up. North Up orients the map to true North, with the
ownship symbol rotated to show track/heading.
u Forward - 120° view with airplane’s present position
displayed at the bottom. Current heading (or track) is
displayed at the top of the map.
u Center - 360° view with airplane’s present position
displayed at the center of the compass range ring with
current heading (or track) at the top of map.
u North up - 360° view with airplane’s present position
displayed at the center, and north is always at the top of
the map.
To Next Page
Loading...
