Provision the Video Reader Pro
Note: You must first create a Video Reader Pro in the Alta Control Center before provisioning.
Use the Open Admin app
1. Open the Open Admin app.
2. Search for org name.
3. Press Admin button (see figure on the next pages) on the back of reader.
Note: Remove the back cradle to expose the Admin button.
4. Tap the serial number of the reader in the Open Admin app.
5. Tap Provision Devicein the Open Admin app and follow in-app instructions.
Usethe Alta Control Center
1. Go to control.openpath.com/loginand sign in. To access the European Alta Control Center, go to con-
trol.eu.openpath.com/login.
2. Go to Devices > Video readers.
3. Press Admin button (see figure below) on back of Video Reader Pro.
4. In the Alta Control Center, click the Register button.
Figure 11 Admin button (a) on the back of Video Reader Pro
For next steps, return to the Alta Control Center to view the activated device.
Installation 37
To Next Page
Loading...
Need help?
General