Barco DP2K-23B Installation Manual

10. Removal and installation of the projector covers
10.7 Installation of the input cover
Necessary tools
Flat screwdriver
How to install
1. Place the top side of the cover on its place.
Image 10-15
Mount input cover
2. Gently mo ve the bottom side of the cover towards the projector and push the bottom side until the locking studs click in the
receivers.
Image 10-16
Secure input cover
3. Secure the cover by fastening the captive screw.
R59770495 DP2K-23B 30/04/2010
99

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g