12. Convergence
12.3 C onvergence c ontrols
Definitions-Abbreviations
• X: H orizontal d irection on the screen, with or igin in the centre of the screen an d + to the right
• Y: Vertical direction on the screen, with origin in the centre of the screen and + to the top
• Z rotation: Tilting of the X and Y ax es in their plane: + is clockwise rotation
• [1] ; [2 ] ; [3] ; [4] ; [5] ; [6] : these are the 6 adjustments av ailable as they appear on the standard convergence adjustment
screen.
Convergence controls, location
1
2
3
4
5
6
Image 12-5
Convergence knobs
1 Red channel, knob num ber 1
2 Red channel, knob num ber 2
3 Red channel, knob num ber 3
4 Green channel, knob number 4
5 Green channel, knob number 5
6 Green channel, knob number 6
Convergence Test pattern
For the manual correction of the D MD conv
ergence, a typical convergence test pattern is generated.
R59770495 DP2K-23B 30/04/2010
117