10. Removal and installation of the projector covers
10.2 Removal of the rear cover
Necessary tools
Flat screwdriver
How to remove
1. R elease both captive screws almost at the bottom of the rear cover using a flat screw drive r (1 ).
1
1
2
2
Image 10-5
Rear housing removal
2. R emove the rear cover of the projector doing the following:
a) gen tly p ull out the top covers of the rear c over (2).
b) then move the rear cover away from the projecto
r.
90
R59770495 DP2K-23B 30/04/2010
To Next Page
Loading...
