Barco DP2K-23B Installation Manual

11. Maintenance
11. MAINTENANCE
About this chapter
This chapter d escribes how to remove the dust filters
Overview
• Remove and clean the front d ust filter
• Remove and c lean both bottom dust filters
• Cleaning the lens
• Cleaning the ex terior o f the projector
• Check cooling liquid leve l
• Cooling liquid refill
• Authorization to clear security warning on the projector
The a ir filters should be cleaned monthly under normal environment conditions. Equipment in very dusty or
otherwise contaminated areas may require more frequent maintenance.
If the air filters are not regularly cleaned, the air flo w inside the projector cou ld be disrupted and cau se over-
heating. Overheating may lead to the pro jector shutting down du ring operation.
R59770495 DP2K-23B 30/04/2010 105

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g