Barco DP2K-23B Installation Manual

9. Projector registration
9.3 Registration of new projector
Possible login types
A projector can be r egistered by th e following persons, eac h with its own login:
• installer
• owner
• Installer/owner
Depending on your login type, s ome steps are not necessary in the registration proc edure. Follow the wizard as displayed on the
screen. The procedure below gives an overview of all possible steps which can be displayed.
How to register
1. Go to Barco’s Partnerzone on https://my.barco.com.
2. Login into the partnerzone.
If you are not yet re gistered, click on Sign in here and follow the instructions. With the created login and password, it is possible
to enter the partnerzone where you can upload the certificate .
When your login is correct, the digital cinema partnerzone start page is d isplayed.
Click Registration DC projector and selec t Regis ter a new DC projector.Thefirst registration page w ill be di
splayed.
Image 9-2
Start registration
3. C lick Browse to locate the certificate file. Select the file and click Open.
The file is filled out next to XML file. Click >> Next to continue.
Some checks are done on the certifica te file. When the file is correct a nd not y et uploaded, the next registration page is displayed.
4. Fill out the Te chnical Data page.
80
R59770495 DP2K-23B 30/04/2010

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g