Barco DP2K-23B Installation Manual

8. Starting up
8.2 Switching OFF the DP2K -23B digital projector
How to switch O FF the DP2K-23B digital projector?
1. Press the standby button on the local keypad or use the Communicator Touch Panel to switch the projector from opera tion to
standby. As a result the lamp turns off but the fans rem ain turning to cool down the projector.
2. Let the projector cool down at least 5 m inutes or until the speed of the fans decreases.
3. Sw itch OFF the projector with the power switch.
R59770495 DP2K-23B 30/04/2010
75

Barco DP2K-23B Specifications

General

Contrast ratio (typical)	2000:1
Projector native resolution	2K (2048x1080)
Ethernet LAN	Yes
Ethernet LAN (RJ-45) ports	3
AC input voltage	200 - 240 V
Lamp power	4000 W

Weight and Dimensions

Depth	754 mm
Width	604 mm
Height	1129 mm
Weight	133000 g