104 of 285
2040 Antenna Select (Available When 2050 Deployed in 2040 Manpack
Adaptor)
This section allows the selection of the antenna type to be used with the 2040
manpack. When an un-tuned antenna such as the whip or a long wire is to be used
“Whip/Long wire” is selected. This enables the automatic antenna tuner. If a 50 ohm
broadband antenna or a tuned dipole is to be used select “50 ohm”. The automatic
tuner is disabled and the BNC socket on the 2040 is used.
Use the Scroll keys to select the setting required (example “Whip
L/Wire” :-
press the key
To Next Page
Loading...
