223 of 285
2050 Transceiver in the 2040 Manpack Adaptor
The Barrett manpack uses a Barrett 2050 deployed in the Barrett 2040 manpack
adaptor, therefore all the operations described in the manual above will operate
when the 2050 transceiver is in this configuration. The only difference is the RF
power output is automatically reduced so that there are only two power settings 10
Watts and 30 Watts. These are set by the channel power setting, Low Power (LP) is
10 Watts and Medium Power (MP) and High Power (HP) are both 30 Watts
The Barrett 2040 Manpack Adaptor Comprises:-
An automatic antenna tuner for operation with a collapsible whip or long wire.
A removable 10Ah Lithium Ion battery cartridge
An inbuilt battery management system that charges and operates the manpack with
DC input voltages between 22 V DC and 26, allowing operation from 24 V vehicle
sources, 24 V solar panels and 24 V hand crank generators. A separate Universal
AC/DC input power adaptor Barrett P/N BCA204007 is available to charge and
operate the manpack when mains voltages are available between 100-254 VAC or
DC voltage between 11-18 V DC are available from sources such as 12 V vehicle
sources.
To Next Page
Loading...
