155 of 285
RF Power Level
This section sets RF power output of the transceiver globally. RF power can be set
to 10 W, 30 W, or 125 W.
Use the Scroll keys to select the RF power level required
(example shown 125W):-
When the RF output power required is displayed press the
key
Note:- When the 2050 is deployed in the 2040 manpack adaptor the power is
automatically reduced to 10 W and 30 W. These power settings corresponding to
the channels programmed power setting - Low Power (LP) representing 10 W and
Medium Power (MP) and High Power (HP) representing 30 W.
To Next Page
Loading...
